Strike Industries X-Comp Mini Cookie Cutter 02 for CZ Scorpion

Features

• M18x1 RH with 10mm inner diameter. Multi-caliber: 9mm/.223/5.56/.308/7.62
• Port cuts help reduce rearward recoil velocity by applying forward pressure
• Specifically designed for 9mm Pistol Caliber Carbine (PCC) barrels for a standard fitment
• Direct installation onto CZ Scorpion EVO w/ use of CZ click stop latch
• SI Jam Nut assists in timing of muzzle device
• Notches for Kalashnikov KP-9 front sight base detent pin (also requires X-Comp Thread Adapter Kit)
• AISI 1144 steel bead blasted with QPQ process finish

The Strike X-Comp Mini Cookie Cutter 02 is a muzzle brake specifically designed for the CZ Scorpion EVO. The X-Comp Mini Cookie Cutter 02 includes a Strike Industries Jam Nut in M18x1 RH thread pitch for easy installation and timing of this muzzle device without the CZ click-stop latch mechanism on an aftermarket Scorpion handguard.

The Mini Cookie Cutter 02 utilizes large ports to significantly reduce perceived felt recoil and muzzle flip. The Strike X-Comp Mini Cookie Cutter 02 can also be paired with our Strike X-Comp Thread Adapter Kits (sold separately) which allows the Mini Cookie Cutter 02 to be used with other weapon platforms and calibers (9mm, .223, 5.56, .308 and 7.62).

For real AR15 / M4 / M16 firearms.
Length: 44.11mm / 1.82"
Width: 24.72mm / 0.97"
Height: 24.72mm / 0.97"
Weight: 62.37g / 2.20oz
Material: Steel 45C
COMPATIBILITY:

CZ Scorpion EVO S1-3 w/ or w/o click stop latch

CZ Scorpion 3+ using the 1/2" x 28 TPI Adapter Kit but due to the length of barrel and handguard, it is not recommended

M18x1 RH thread pitch

SI OPPRESSOR

NOT COMPATIBLE:

CZ Scorpion 3+ unless you purchase the 1/2”-28 TPI to M18x1 RH Adapter Kit

For use with a Kalashnikov USA™ KP-9/AR-15/AR-9/Scorpion 3+

Purchase the Strike X-Comp Thread Adapter Kit (1/2”-28 TPI to M18x1 RH)

For use with a SIG SAUER® MPX

Purchase the Strike X-Comp Thread Adapter Kit (SIG MPX M13.5 x 1 LH to M18x1 RH)

For AR10

Purchase the Strike X-Comp Thread Adapter Kit (5/8"x24 TPI to M18x1 RH)