Strike Industries X-Comp Element C for CZ Scorpion

Features

• M18x1 RH with 10mm inner diameter. Multi-caliber: 9mm/.223/5.56/.308/7.62
• Port cuts help reduce rearward recoil velocity by applying forward pressure
• Specifically designed for 9mm Pistol Caliber Carbine (PCC) barrels for a standard fitment
• Direct installation onto CZ Scorpion EVO w/ use of CZ click stop latch
• SI Jam Nut assists in timing of muzzle device
• Compatible with SI OPPRESSOR (not included)
• AISI 1144 steel bead blasted with QPQ process finish

The Strike X-Comp Element C is a muzzle brake specifically designed for the CZ Scorpion EVO 9mm blowback system as it features CZ's click-stop latching mechanism which is also utilized when using an OEM handguard.

If you do not need to use CZ's click-stop latching system, the X-Comp Element C includes a Strike Industries Jam Nut with a M18x1 RH thread to give you an easier way to install and time the muzzle device when an aftermarket Scorpion handguard is used.

The Element C utilizes smaller port cuts to reduce perceived felt recoil and muzzle flip. The Element C can be installed onto a CZ Scorpion EVO barrel retaining nut and any other M18x1 RH threaded barrel.

The Strike X-Comp Element C is SI OPPRESSOR compatible and can be paired with a Strike X-Comp Thread Adapter Kits (sold separately) to be used with other weapon platforms to take advantage of its multi-caliber compatibility (9mm, .223, 5.56, .308 or 7.62).

For real AR15 / M4 / M16 firearms.
Length: 44.11mm / 1.82"
Width: 24.72mm / 0.97"
Height: 24.72mm / 0.97"
Weight: 62.37g / 2.20oz
Material: Steel 45C
COMPATIBILITY:

CZ Scorpion EVO S1-3 w/ or w/o click stop latch

CZ Scorpion 3+ using the 1/2" x 28 TPI Adapter Kit but due to the length of barrel and handguard, it is not recommended

M18x1 RH thread pitch

SI OPPRESSOR

NOT COMPATIBLE:

CZ Scorpion 3+ unless you purchase the 1/2”-28 TPI to M18x1 RH Adapter Kit

For use with a Kalashnikov USA™ KP-9/AR-15/AR-9/Scorpion 3+

Purchase the Strike X-Comp Thread Adapter Kit (1/2”-28 TPI to M18x1 RH)

For use with a SIG SAUER® MPX

Purchase the Strike X-Comp Thread Adapter Kit (SIG MPX M13.5 x 1 LH to M18x1 RH)

For AR10

Purchase the Strike X-Comp Thread Adapter Kit (5/8"x24 TPI to M18x1 RH)